Search results

Great post, thanks! Don't forget side to side is important too. When we weighed our rig (340RL) wheel by wheel the off driver side (kitchen side) rear wheel was at the 3500 lb max. The door side front wheel weighed out at only 2500 lbs.

We use the Verizon Home Internet premium. Unless you go in an area with no phone service (Smokies, desert, etc.) we usually have 300 Mbps down and 20 Mbps up. It is $65 a month, unlimited data and not throttled. No equipment cost. A small box that fits in a window, no external antenna, no...

The black and gray water plan for the 340RL does not show an overflow. I would imagine dumping black and gray water on the ground is against code. Contact service and ask for a "DWV Plan" for your unit.

Are you Cindy Bardon?

It is booked up. This is the link: https://www.facebook.com/events/3226489580979865/?acontext=%7B%22event_action_history%22%3A[%7B%22surface%22%3A%22group%22%7D]%7D

We will add you to the standby list. Please send me (Trent Mills) your contact information by private message on Facebook. We will contact you on or before January 5, 2025 to let you know if we can accommodate you. Thank you.

I have the Ed Schellhouse infamous PEX Kit. https://www.facebook.com/groups/2507480582797894/permalink/2979360648943216

Not much room for a soundbar, we only have about 1.5" underneath the existing TV. I am thinking of something where the existing stereo is and sub woofer behind the recliners. I guess I could raise the TV up an inch....

First Mississippi Gulf Coast Alliance Rally is now FULL! Thank you for all that have registered and will join us at the beautiful Biloxi Bay RV Resort. Activities include pot luck, drawings, campfires and lots of socializing with your FamAlly members. Location...

To answer the questions "Why are disc brakes so much better than standard drum brakes? what reasons would you advise me for ordering this upgrade when we purchase our 385FL?". This is a pretty good summary in my opinion. MAINTENANCE: Fewer moving parts. Compare the caliper with one moving...

I am a little surprised you picked the 3000 instead of the 5000. You need to have a "Systems and lessons learned" discussion at one of our rallys (or just let me buy y'all supper and ask you an hour's worth of questions)! Thanks for posting your experiences!

Fantastic! Can't wait to see your updates!

Does this help?

Thanks for following up with the answer!!!

See attached file. Keep in mind this is NOT an Alliance fix or mod. I do not work for Alliance. Use at your own risk.

Several owners have replaced the plastic skis with Stainless steel. Here is a link to the write up. We are updating the procedure with pictures, more details, etc. https://www.facebook.com/groups/635171803671871/permalink/1487570341765342

We have the 3500 Ram. We have an "Alternate Trailer Height" button that we push to lower the bed and inch or two. Keep 5" or so between the trailer and the bed rails. We have our hitch on the lowest setting and the trailer pin on the highest setting. It looks like your truck is lifted? Can you...

Could you post the pic you are referencing? For some reason I can't get to it. Thanks!

We have a 340RL (2022), we got the 7K Morryde IS and we really like it. Less "chucking", no "bottoming out" on bumps (we had this on Interstate before we really loaded the rig), the trailer rolls over speed bumps better than our truck, more suspension travel and less failure points. They used...

Thanks, on my list to look at!

So this is the way it should be wired? If we want to bypass this, what is the "Primary" or "Secondary" load? Maybe this is a separate topic? Thanks!

Clarification. Disk brakes for the standard 7K axles have been offered as an option from the first units. The 8K axles and disks are a new offering.

So far we have been happy with the stock pinbox. We haven't noticed a lot of jacking or a rough ride. We did get Morryde Independant Suspension within 4,000 miles of buying the rig. At the moment, I don't see an advantage to changing it. Eventually we may go to the Morryde polymer one for a...

Thanks!

I don't quite understand. Are you saying the connector came off the sail switch? I don't know what the "stacon" connector is. Thanks!

A couple rules of thumb to think about: 1. On a good day, you get about 6 hours of your rated solar. So if you have 1KW of solar panels on your roof, on a good day you will get about 6 KWh of power. (Sun straight down on panels, no shade or clouds, panels clean) On a bad day, you may not get...

Don't forget the tax credit (30%) on solar this year and next. Having something you can expand (solar, batteries and inverted watts) without throwing away the original system is very important.

So check and make sure I stick close to the stock width. Thanks!

Thanks, how is the road noise?

Thanks, currently in my running are the ones below. I keep leaning towards the Ridge Grapplers. There are SO many tires and I hate to put something on that I am going to hate for two or three years.... ;-) Michelin A/T 2 Nitto Ridge Grapplers Yokohama Geolander Firestone Transforce AT2

I am looking for something with a little better off road traction. My 2019 SRW Dodge 3500 4x4 currently has Firestone Transforce HT. Looks like I will get about 35K miles on them but they are horrible on wet grass. Luckly, I have 4x4! I would like to hear actual towing experience, off road...

The Victron MPPT series has several models that will charge multiple volages. https://www.victronenergy.com/solar-charge-controllers/smartsolar-150-35

You do have the option on some of the jacks to raise them a bolt hole or more. That gives you about 2" more clearance per bolt hole.

Yea, I usually end up creating problems that didn't exist if I dabble too long.

WAF is important!!!!

Parky is pretty nice! Thanks!

Lots of help on this page, Jim Beletti is a great resource. The sizing file I was talking about is on the "Alliance RV Glamdockers" group "Files" section. If you can't get there, tell me what groups you are on and I can drop it into the files section for you. I did not want to go to 24 VDC...

I like your plan, this could be a long thread! Just to clarify, you are going to go with a 12 VDC system? If you are looking at growing, I would consider a 24 VDC system. You could add a second string of 200 Ah batteries in the future (and a second Multiplus II if you ever wanted to go above...

Escapees is who we are going to go with. Several different options.

Glad to be of help!

Jim, do you know if this is a "SUBURBAN RV FURNACES with FAN CONTROL MODULE BOARDS 12 VDC HEATING" or a "SUBURBAN RV FURNACES with TIME DELAY 12 VDC HEATING"? There are different troubleshooting trees for each of these models in the service manual.

Copy, thanks!

Could you post the model number of your water heater? I posted a service manual in the Facebook "Alliance RV issues and fixes" group "Files" folder. If you could post the model number it would help.

We had that for a short while in our Samsung in the 340RL, we were not closing the freezer/fridge door completely. It took a few days to get totally defrosted.

Bauer can do one key for all your locks. I sent them the info for the National Rally, I hope they show!

This is what we are replacing it with. SCI Barb Cam Lock - Standard Cam Length Barb Cam length: Standard Cam Length https://bauerproducts.com/product/sci-barb-cam-lock/

9". https://www.amazon.com/gp/product/B01J2T807E/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 After installing them I am considering raising my stabilizers a bolt hole. They seem to lower my clearance an inch or so.

Trent and Yvonne will be there!

During our latest cold snap, my thermal camera showed the front closet floor, right above the pin box was very cold. I think this is the area on the bottom of the nose above the pin box. We also had some condensation in this area drip down through the pin box and the side of the nose cone. Has...

Thanks Jim! I am going to try to run down the documentation for it.

I am not at my unit and was wondering what the model is and the number. Thanks! Trent Mills

We think it was worth the expense. We plan on boondocking a lot but I never thought it would payoff on the roads and interstates too! We planned to get it when we bought the rig. We got the install done at the Elkhart Morryde factory.

We got the Moryde Independant Suspension (IS) on our 2022 340RL. We can tell a difference in towing. The trailer does not "Bottom out" now like it did before the IS while towing on rough highways (Interstate). Tire wear is very even.

I am not sure what your question is. We have a 340RL, can you be more specific?

Also, I have seen where people cut reflectix, put velcro on it and the skylight sides. When they want shade, they put the reflectix up. If they want the light, they pull it down. It also helps with heat gain/loss through the skylight.

Thanks Jim!!!

We use the Viair 450P. No problems. https://www.amazon.com/gp/product/B0141KJTKQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Which make and model fridge do you have?

I am up there about once a month.