Hello friends
We bought the delta in January and our camping this weekend with it. We filled the fresh water tank and put the drain plug and filter in the water heater and turned on the water pump. It keeps running and no water in the lines ( turned on faucets….nothing)
We tried the bypass and the pump pulls water that way what are we missing?
Thanks
***UPDATE***
So it turns out the Delta uses a different service panel than their 5th wheels. It turns out that there was some poor labeling of switches and the manual actually has the wrong information. I’m going to look into where to send that.
Anyway, the panel has a lever that says “City fill” and “Tank fill”. The lever has to be moved to TF to fill the tank. Makes sense. The manual says to use water from the tank put the lever at TF. After spending last night and this morning trying to troubleshoot we went back to the dealer and managed to get them to take a look. Turns out that lever needs to be moved back to “City fill” to pull water from the tank. I might have tried that if the manual had specifically said put it on Tank fill. So now the water is flowing now. Now to plug the leaks. 😥
We bought the delta in January and our camping this weekend with it. We filled the fresh water tank and put the drain plug and filter in the water heater and turned on the water pump. It keeps running and no water in the lines ( turned on faucets….nothing)
We tried the bypass and the pump pulls water that way what are we missing?
Thanks
***UPDATE***
So it turns out the Delta uses a different service panel than their 5th wheels. It turns out that there was some poor labeling of switches and the manual actually has the wrong information. I’m going to look into where to send that.
Anyway, the panel has a lever that says “City fill” and “Tank fill”. The lever has to be moved to TF to fill the tank. Makes sense. The manual says to use water from the tank put the lever at TF. After spending last night and this morning trying to troubleshoot we went back to the dealer and managed to get them to take a look. Turns out that lever needs to be moved back to “City fill” to pull water from the tank. I might have tried that if the manual had specifically said put it on Tank fill. So now the water is flowing now. Now to plug the leaks. 😥
Last edited: