Recent content by JWalker

We are towing our Avenue with a 2023 GMC 2500. Very pleased. The truck has a 3280 payload which handle the 2300 pin of our 30RLS.

We've been really pleased with the 30 RLS. We like the layout. It is shorter in length, which has been very nice to maneuver and some of the tighter campgrounds. But with three slides. It has plenty of storage and room inside.

Welcome from another 30RLS

Welcome from another 30RLS owner

Our last trailer weighed in at 15k. With tandem 7k axles. (14k). We had a 3k pin weight. So technically only 12k was sitting on the trailer axles and 3k was sitting on the truck...when hooked up.

We really like our 30 RLS. But unfortunately, the writing was on the wall from the very beginning. The 32RLS came out first and that's all you seen in advertisement and websites. The Alliance website didn't even update 30RLS information and pictures for almost a year. We ordered ours at the...

Jim, I might be looking at it wrong. But when I click on your link, it takes me to the "Owner event" page. When I scroll down to the Pennsylvania rally and click on that Facebook link. It takes me to a upper Midwest rally page.

What section of sites are held for the rally?

We have had a few Rallies at DrummerBoy. Nice place. Easy access of rt 15. We stayed in the back pull-thru sites. Pretty far from the entrance of the campground though.

We had an Anderson for about 5 years and 25,000 miles. Pulling a 15,000 lb 5er. Really liked the hitch. Smooth, no chucking and easy to hitch and unhitch. With the Avenue, I am using a non-slider B&W Companion now. GMC standard bed. No turning issues so far.

We have a 30RLS. We were really surprised how quiet the ACs are. They do not disrupt normal conversation or tv listening. We placed a small fan on the floor of the hallway right outside the bedroom. It really pushed a lot of the cool air from that small space down into the kitchen.

Welcome!! From a 30RLS in SW PA.

No, we do not. Never had enough vacation time to go long enough to need to do laundry. Lol.

Our 23 GMC 2500 handles our Avenue quite well.

Not cut...but pinched closed. Causing the fridge not to work on propane when the slide was closed. I had to enlarge the entry point and redo the bracing that was pinching the lines when closed. Poor design and no thought given to placement of the lines!!