Our 2022 340 had the same problems when we got it. I found the junction behind the trim panel on the left side bottom of the stove was not made up correctly.
I have been having the same problem with our rig. I have replaced the inverter under warranty and today I talked to Dennis at Progressive Dynamics about the problem. He has given me some home work to report back to him.
I pulled power for the Cheap heat from the outlet side of my hardwired progressive surge protector. I finished the basement wall project today. So I will get a post up later this week about that.
I did plumb the filters in before the softener. My thinking is that I would rather catch any stuff before it has a chance to get into the media of the softener.
I figured out just the small knob wouldn't keep the door closed while we are moving the rig. I made a trip to Walmart and found a small cutting board that was just what I was looking for. I drilled hole in the middle added some self adhesive felt on the back side to keep from scratching the...
We had the RV Cheap Heat in a previous rig and it was one of the first mods I performed on the new 340. It is a pretty simple install if you are comfortable with running new wires on the 120 side and splicing in on the 12 volt side. The first thig I did was to removed all the basement walls to...
I've been following the Facebook groups looking at different ways to permanently mount them. I finally decided to mount the dual filters after the water inlet and before the nautilus panel. I then come out if the filters with soft flex hose to my water softener. I used quick disconnects on the...