F350 with Avenue 29BH

[justin.munoz]

I’m curious if anybody has information or pictures showing how level the Avenue 29BH sits with an F350.

I’m wondering if in order to maintain the six inch minimum clearance to the bed rails whether the trailer would sit nose high and by how much.

 

[UGA Fan]

I don’t have your exact combination, but close. My truck is a 2026 Chevrolet 3500 Trail Boss SRW and the camper is a 2025 29RL. The picture is from before I installed 2” lift blocks on the camper and with the pin box in the next to highest set of holes (higher holes = less nose height). After moving the pin box up and installing 2” lift blocks, it got a bit better. I can share pictures afterwards if you’d like. All in all, I was not pleased with lifting the trailer. Parts and labor to lift it and raise the pin box was nearly $2000. I would not do it again. Also, with the lift, I have 7 1/2” of tailgate clearance.

 

[justin.munoz]

I don’t have your exact combination, but close. My truck is a 2026 Chevrolet 3500 Trail Boss SRW and the camper is a 2025 29RL. The picture is from before I installed 2” lift blocks on the camper and with the pin box in the next to highest set of holes (higher holes = less nose height). After moving the pin box up and installing 2” lift blocks, it got a bit better. I can share pictures afterwards if you’d like. All in all, I was not pleased with lifting the trailer. Parts and labor to lift it and raise the pin box was nearly $2000. I would not do it again. Also, with the lift, I have 7 1/2” of tailgate clearance.
View attachment 5386

Thanks, that is helpful. Would be great if you have an after picture with the lift in place, as I am considering that option if I purchase the 29BH and it does not sit level.

 

[UGA Fan]

Here is the picture with the lift and raised pin box.

 

[Chief2hairs]

Hello,

I have a F350 SRW Lariat and a Avenue 29RL. I have approximately 7" around the rails and didn't change the factory king pin hitch location. My B&W hitch setting is set in the middle height location. We sit about 2" high at the nose, not perfect level, but pulls nice.

 

[justin.munoz]

Hello,

I have a F350 SRW Lariat and an Avenue 29RL. I have approximately 7" around the rails and didn't change the factory king pin hitch location. My B&W hitch setting is set in the middle height location. We sit about 2" high at the nose, not perfect level, but pulls nice.

Awesome! You don’t by chance have a picture from the side do you?

 

[Chief2hairs]

Presently I do not, but will be hooked back up on July 2nd and can send you one. I do have a shot of the day I picked up the 29RL, but I adjusted the B&W hitch height after that day to my present setup. If you want that photo, I can attach it.

 

[justin.munoz]

Presently I do not, but will be hooked back up on July 2nd and can send you one. I do have a shot of the day I picked up the 29RL, but I adjusted the B&W hitch height after that day to my present setup. If you want that photo, I can attach it.

Thanks, yeah if you do have that it would be helpful. How much did you lower the front after the picture?

 

[Chief2hairs]

Lowered the B&W hitch by 1 inch, nothing with the RV king pin. The attached picture is delivery day and sitting on an inclined parking lot.