wiring on slide tube

[SKYSKIOC]

we have a 2024 Avenue 32 RLS and I was underneath and noticed a bunch of wiring laying on one of the slide guides or tubes and I was wondering if this is a concern. when the slide moves in and out it rubs on those wires. should those wires be sitting on top of the tube or should they be pinned up somewhere and out of the way? I did see some yellow Romex in there that is for the 120 volt outlets, plugs etc. any help appreciated

 

[BryanValRox]

we have a 2024 Avenue 32 RLS and I was underneath and noticed a bunch of wiring laying on one of the slide guides or tubes and I was wondering if this is a concern. when the slide moves in and out it rubs on those wires. should those wires be sitting on top of the tube or should they be pinned up somewhere and out of the way? I did see some yellow Romex in there that is for the 120 volt outlets, plugs etc. any help appreciated

They should be secured so that they don’t rub. It is only a matter of time until the insulation rubs thru and you are chasing a short circuit.

 

[7426TRISS]

I agree, problem waiting to happen. If under warranty, I would have the dealer correct.