Want to change the Plastic Pendant Shades?

[Midnight Rider]

I have a 295MK and I want to change out the plastic shades on the wall sconces and kitchen pendants?
I got the bulb out 😂
I didn’t want to break either of the different fixtures? Tried to pull it off? Unscrew it? Felt like I was gunna break it?
Help! Any ideas?
Thanks in advance!
AMW

 

[John R]

Does that ring right above the bulb screw off

 

[Midnight Rider]

In does not as far as I can tell. I started trying to twist it off like you would a residential light and I thought I might break it?

 

[Meanjean73]

I tried to remove mine and couldn’t figure it out. Thought they would break if I pulled harder.

 

[7426TRISS]

I would remove the bulb first. If you loosen the screws on both side or remove, then it looks like you can unscrew from the top, also looks like a ring holding the lens, that may be something too.

I have the same light in my unit, I will, look at it tomorrow, and update everybody

 

[Meanjean73]

I would remove the bulb first. If you loosen the screws on both side or remove, then it looks like you can unscrew from the top, also looks like a ring holding the lens, that may be something too.

I have the same light in my unit, I will, look at it tomorrow, and update everybody

I tried to remove the nut above the light and it doesn’t move. When I looked at it from the top down it looks like a press fit onto the housing?

 

[M and E]

I think, don't know, that Alliance was using D-Light or Dream Lights for many of their fixtures. You could send a pic to them and I bet they can tell you how to take it off is this diagram is not helpful.

17inch LED Glass Shade Pendant Light With Replace Bulb

Versatile 12V DC Compatibility - Ideal for mobile and residential spaces including RVs, boats, motorhomes, kitchens, dining rooms, bedrooms, and hallways. Designed for flexible indoor use across diverse environments.

dreamlightingled.com

 

[Meanjean73]

I tried to remove #4, I couldn’t get it to budge. I’ll go look again. I don’t see threads like they are in that picture.

In the mean time I told my wife they don’t come off and she moved onto the next project….for now.