Sanimarin Toilet

[94wamiadga94]

Animation toilet will not stop filling with water

 

[94wamiadga94]

Darn autocorrect. Sanimarin toilet

 

[BryanValRox]

Darn autocorrect. Sanimarin toilet

I believe those use an electric solenoid to fill the bowl with water.
It could have debris in it that is causing it not to seal properly, or maybe someone wired it incorrectly.
Should be a simple fix .

 

[94wamiadga94]

I believe those use an electric solenoid to fill the bowl with water.
It could have debris in it that is causing it not to seal properly, or maybe someone wired it incorrectly.
Should be a simple fix .

Do I remove the toilet to get to the solenoid valve?

 

[BryanValRox]

Do I remove the toilet to get to the solenoid valve?

We don’t have one of these, so I can’t say for sure. You should be able to follow the water line from the coach that feeds the toilet. The valve would have 2 wires attached to it, plus the inbound and outbound water lines. Are there any removable panels or openings on the rear of the base?

 

[BryanValRox]

This might help you some as well.

https://www.alliancerv.com/sites/default/files/2025-04/sn4_071_not720_2021-06_hd_web.pdf

 

[94wamiadga94]

We don’t have one of these, so I can’t say for sure. You should be able to follow the water line from the coach that feeds the toilet. The valve would have 2 wires attached to it, plus the inbound and outbound water lines. Are there any removable panels or openings on the rear of the base?

Thanks. The issue actually was too high water pressure.

 

[BryanValRox]

Thanks. The issue actually was too high water pressure.

Glad you got it figured out. I didn’t see a max psi spec listed in the install manual.
Any chance you will share what pressure value was to high?
What did you have your regulator set too?

Generally, most folks run between 40-50 psi.