Rear Gray tank Pull handle gone

[dhcolesj]

I've looked all over and cannot find a pull handle with a male thread on the end. The back (or rear) gray tank valve pull handle came off somewhere in Arizona, and I need to find a replacement. Anyone here know what I should be searching for? The rod sticking out has a female threaded hole, so either there was some kind of adapter between the handle and this rod, OR, there was a special handle. This is on a 2023 40v13 and it's the gray tank handle under the slide out.
Having no access to any kind of microfiche layout I have no way to find an OEM part replacement.
Anyone else out there had to replace this?

 

[Mike in North Wales]

Can you just get a short stud or threaded rod from a hardware store to mate the female handle to the female rod? That may be your easiest solution. Use some blue Loctite for assembly.

 

[Grassjohn]

This is what you need:

https://www.amazon.com/RecPro-Waste-Handle-Replacement-Extension/dp/B089YTD924/ref=asc_df_B089YTD924/?tag=hyprod-20&linkCode=df0&hvadid=459648088933&hvpos=&hvnetw=g&hvrand=17594002892215211971&hvpone=&hvptwo=&hvqmt=&hvdev=m&hvdvcmdl=&hvlocint=&hvlocphy=9028316&hvtargid=pla-943286662950&psc=1

I purchased 2 grey and 2 black spares, as they can crack. They come with new bolts, and I used thread locker when I installed them.