firstly the sensors were routed to/from wrong tanks.. swapped over.. better.
luckily front tank was plumbed to the genset.. cool.
back tank sensor showed all green ..FULL .. when it was almost empty
anyone know how to re-calibrate ? .. unplugged its 12V and now both levels show full when genset is 1/3 full and toy tank is empty.
thanks guys
-------- update - Solved.. unplug behind .. swap sensors.. then toy tank came alive.. ensure fully seated tank sensor inputs - these had worked loose.. The build guys wrap those 2 sensors wires in a harness .. zip tied up.. and easy to pick the wrong plug for the wrong tank.
luckily front tank was plumbed to the genset.. cool.
back tank sensor showed all green ..FULL .. when it was almost empty
anyone know how to re-calibrate ? .. unplugged its 12V and now both levels show full when genset is 1/3 full and toy tank is empty.
thanks guys
-------- update - Solved.. unplug behind .. swap sensors.. then toy tank came alive.. ensure fully seated tank sensor inputs - these had worked loose.. The build guys wrap those 2 sensors wires in a harness .. zip tied up.. and easy to pick the wrong plug for the wrong tank.
Last edited: