Mcd help

[Johnjp]

Any one have a suggestion how to get to the MCD shades adjustable screws. I thought of a right angle screw driver just not sure if this will work. I would hate to remove the valance. Any suggestions would be helpful. Also any suggestions on a good thin reliable cordless screw driver that would work.
As always I’m very grateful for any and all help.
John P

 

[UFF]

I removed the valance when I done mine.

 

[Oregon_Camper]

Here is the video from Alliance

 

[RoadJunkie]

An important question may be; Why doesn't the factory adjust the shades to a common standard before the rig is released to the end user? My shades are "adjusted" all over the place. Some spring quickly and some need a push to get them to roll up. Some roll past the equator and some are left hanging several inches down. I might recommend a well-aligned hole in the valance that allows the user to simply insert a screwdriver to adjust the shade. A plug would be used on the hole following alignment.