BryanValRox
Elite Member
Hi folks, just wanted to share an upgrade I performed on our 310RL this weekend.
I find it difficult to gauge the rear of the trailer while towing, specifically in a passing situation.
So, I decided to install these edge marker lights that extend from the side of the coach. I now have a clear reference that I can see in the mirror that allows me a reference to the rear of the coach.
Yes, they do extend 6 inches from each side(kind of the point I guess), adding a total of 12 inches to the overall width of the coach, but they are made with a flexible rubber mount in case you snag/scrape something.
They are 12V LED and I have them tied into the turn signals and marker lights on each side.
Below is a picture of the driver side, and an Amazon link is below if you might be having the same issue referencing the rear of the coach.
I find it difficult to gauge the rear of the trailer while towing, specifically in a passing situation.
So, I decided to install these edge marker lights that extend from the side of the coach. I now have a clear reference that I can see in the mirror that allows me a reference to the rear of the coach.
Yes, they do extend 6 inches from each side(kind of the point I guess), adding a total of 12 inches to the overall width of the coach, but they are made with a flexible rubber mount in case you snag/scrape something.
They are 12V LED and I have them tied into the turn signals and marker lights on each side.
Below is a picture of the driver side, and an Amazon link is below if you might be having the same issue referencing the rear of the coach.
