Any advice on where to find location of a fuse or circuit breaker for the front stabilizers in the Avenue 332rl. Both sides stopped working on my last move. I tried over riding in BAL system and doing it manually but no help. Had to do it the old fashioned way with a socket wrench.
Front stabilizers stopped working
- Thread starter chungap2
- Start date
The "fuse" for the landing gear is located on this 12v busbar (see image). Should be easy to trace the power wire coming off the pump, back to the 12v busbar to figure out which one your looking for. These are self resetting, so after 30 seconds (give or take) it should be ready to use again. If it still fails, you can replace it with a larger one. I changed mine to an 80 amp breaker like this.
