Fender skirting replacement

[ed7209377648]

2020 32rl. The plastic skirting is breaking at the screwed in points and hopefully someone has a company or a part number so I can order replacements.

 

[George]

I'd be surprised to find one anywhere other from Alliance. Include your VIN when you email info@alliancerv.com
There are several YouTubes about reattaching your new skirt to make it last longer.

 

[ed7209377648]

Thank you for the information concerning skirting for my trailer. I will reach out to Alliance for a possible replacement.

 

[George]

Checkout this as well https://www.icondirect.com/

 

[Terri&KevinGates]

Another place to try would be recpro.com. https://recpro.com/rv-fender-skirts/

 

[fyrmnjim]

My fender skirt came off on the freeway. Using sheet metal screws with thin aluminum is another FU at the factory.
I reattached it with pop rivets and washers.

 

[George]

My fender skirt came off on the freeway. Using sheet metal screws with thin aluminum is another FU at the factory.
I reattached it with pop rivets and washers.

I just inspected my <1yr old unit and noticed some cracks starting. When I replace them (hopefully warranted) I'll also use the large head exploding rivets but add an ⅛" thick rubber washer between the skirt and J-panel to fill the gap.

https://a.co/d/gGuCqiy

https://a.co/d/6Y2w3qA

 

[Bozo]

Mine are cracking and shedding screws as well. Just another thing to add to my to do list. Buying a new Alliance was not a good decision.

 

[PARADOX]

My fender skirts started coming off when I was driving down the highway and my trailer was out of warranty by 2 months. I got Alliance to send me new fenders but I had to pay shipping direct from Alliance. $194

 

[fyrmnjim]

I went the cheap way. Black duct tape and pop rivets.

 

[Bozo]

Good enough in my book. I would have done the same. Mine are getting the larger washers and rivets. If I find any more cracks, I will plastic weld as well.

 

[Lantley]

I have replaced a couple of screws with new screws and large washers