2023 Paradigm 395DS
Our Norcold refrigerator stopped working on Thanksgiving Day. It started beeping, like the does were open. Flashing 4 and 5. Then it just stopped working. I pulled the fuses and it restarted, worked for about 30 minutes then off again. Anyone have any ideas?
Here are the error codes,
Error Codes
When an error occurs the display screen will blink an error code [3]. ( ART02776)
E1: Fresh Food Thermistor Error
E2: Freezer Thermistor Error
E3: Low/high voltage cutout
E4: Door open (longer than 2 minutes) E5: Voltage too low
E6: Ambient Thermistor Error
E7: Fresh Food Evaporator Fan Error E8: Freezer Condenser fan failure E9: Fresh Food Condenser fan failure
Here is a link to the manual
This statement may be of interest to you
Low voltage protection system:
The voltage required to start the refrigerator initially is 10.9 volts. In order to prevent completely draining the battery, the refrigerator will automatically shut-off when the DC supply voltage becomes too low. The refrigerator will not restart until the DC supply voltages increases. These shut-off and restart voltage levels are:
12VDC Operation
Startup 10.9 VDC Shut-off 10.4VDC Restart 11.7 VDC
Have you checked your battery condition ? Connections? Cell fluid levels if it is the flooded type. Is your converter charging the battery?
Is the a Solar charging the battery?
Code 4 is door open related, maybe leaking seals or something holding door open slightly.
Code 5 is low voltage