Recent content by Famtraveler24

Thx Jim

UPDATE: Cerbo Gx and Smart Shunt sold. Remaining components available as of 6.18.22 Hi all. I started a project but never finished. All equipment is brand new and available as a set or by component. If local to NC, pickup is recommended due to weight. 1. Quattro 24/5000/120 - $2900 2. 2 Smart...

Was this ever solved? I have the same issue in our 390 MBR.

Anyone know where I can find one? Mine needs to be replaced. Thx.

12 200W Sunpower

I hope it is OK to post this here. If not, please take down. I have a brand new Victron 24/5000/120 for sale. I've just decided to go with 2 Multiplus inverters in parallel instead. These sell for 2900 + tax (~$200) + 250 for shipping. Will sell for 2600 flat and would be willing to meet in NC...

Thx again!

Thx so much. I've settled on 6AWG. As for the ground wire, is 6AWG also the norm?

Hi everyone. Any pointers when installing a 3 way manual transfer switch as part of my solar setup for our 50A 390 what guage wire I should be using on the switch. 10AWG works well but 6AWG does not. Thoughts?

Hey fellow Allys. Not sure if it is OK to post this, so admins, please take down if needed. I have a family member in need and need to sell one of my built but not used LifePo4 280ah battery packs. There are 8 cells and an Overkill Solar 8s BMS. Selling all for 1250, or 8 cells for 1000 or 4...

Same journey here on our 390. 2400w solar on the roof. 24v 280ah batt bank, Quattro 5000. Panels soon to be installed.

Sounds awesome. Soon, I'll be rerouting my shore power 6/3 flex Romex to and from my new Victron Quattro (through a manual transfer switch). This wire currently runs from the exterior plug behind the midbunk drawers and to the AC/DC distribution panel. I'll be pulling it from the panel, splicing...

Greg, I also have a 390. I would greatly appreciate any photos you may take of your internal wire runs, and how you navigated them. Thx!

Jim, Now having gotten under my 390, I believe the driven fasteners were used. Take a look at the attached and let me know if you agree. If so, I suspect I'll cut out a section of the Coloplast and not attempt to remove an entire section. Thx again.

Might I suggest that, as you make changes or update parts for new models, you seriously consider issuing a "field assistance bulletin" for existing owners to inform us of the changes. This would go a long way in helping us to know if there are changes we might want to be aware of (e.g., changes...