Fender skirts

[Pat 370FB]

Does anyone know of a compatible fender skirt other than OEM for a 2021 370 FB. My fender skirt is a split into 2 pieces because of one of my slide outs. Alliance has the part for $39 dollars but wants to charge me $200+ for shipping . There's got to be an alternative out there somewhere.
Thanks!
Pat

 

[Lantley]

Does anyone know of a compatible fender skirt other than OEM for a 2021 370 FB. My fender skirt is a split into 2 pieces because of one of my slide outs. Alliance has the part for $39 dollars but wants to charge me $200+ for shipping . There's got to be an alternative out there somewhere.
Thanks!
Pat

I felt the same way about the shipping charges. However when I actually tried to order a couple of aftermarket fenders the final price with shipping was close to or the same as the Alliance price.
The difference in the final price was minimal and I wasn't sure how well the after market would fit.
With that in mind I just ordered it from Alliance.

 

[2 Allies]

If you are going to the National Rally in May, you can order and pick up at the Rally for free. Or if you know someone that is going they can pick-up for you. Welcome to the forum and where are you located?

 

[Midnight Rider]

I felt the same way about the shipping charges. However when I actually tried to order a couple of aftermarket fenders the final price with shipping was close to or the same as the Alliance price.
The difference in the final price was minimal and I wasn't sure how well the after market would fit.
With that in mind I just ordered it from Alliance.

Lantley,
I totally agree! Where isn’t shipping high? Stuff costs more and so does shipping, labor, Fuel??? You can’t get around it.
it’s all gone crazy! Nothing for Nothing my Friend!
This way you get screwed on shipping but at least you get the right part.😂

 

[RockDr896]

When I had to repair the back wall of my 370FB (A recall issue), they sent me the replacement skirting. It DOES NOT come pre-cut, so get yourself some shears. I used the Dewalt shears, that attach to my cordless drill.

 

[Lantley]

The fenders cut easy enough. I was able to cut them with a simple set of tin snips or officially known as aviation snips
Aviation Snips

 

[RockDr896]

The fenders cut easy enough. I was able to cut them with a simple set of tin snips or officially known as aviation snips
Aviation Snips

I have never mastered the art of Tin Snips on a long cut. I always end up curling the edge and bind up the snips. You are a master, if you know the art of not doing that. I bow to your mastery!!

 

[Lantley]

I have never mastered the art of Tin Snips on a long cut. I always end up curling the edge and bind up the snips. You are a master, if you know the art of not doing that. I bow to your mastery!!

Thanks I'm no master believe me! You sort of have to angle/keep the cut material out of your way as you cut down your straight line!