George
Well-known member
The receptacle under the island drawers is my dishwasher prep. I see a circuit breaker labeled “DISHWASHER” which leads me to believe that the receptacle is a dedicated 15 Amp circuit for the dishwasher. But I also see that there are TWO Romex cables in the dishwasher Speedwire receptacle. Where does the 2nd Romex go? It disappears through the floor under the sink side of the island. I have tested all the receptacles that I can think of and all are still hot after turning off the DW circuit breaker.
I have contacted Alliance and at first was told it goes to the fireplace and the circuit is intended to be used by either the DW or FP, one at a time. 😮 This is not the case as I have a separate circuit breaker that successfully covers the fireplace. Then I was told that the DW prep is in fact an isolated circuit and to test all 110v outlets. 🤷🏼♂️ Awaiting response from me saying that has been done.
If anyone can help it would be greatly appreciated as knowing what circuit breakers control what is a pretty important piece of information. Or if you could peek under your the island drawers and let me know if you have two Romex cables in the DW receptacle.
I have posted on here before that I added an outlet on the outside of the island from the DW prep. I revisited my installation to remove the Speedwire receptacle in favor of wire nuts in a grounded metal Handy box. That's when noticed the 2nd Romex.
I have contacted Alliance and at first was told it goes to the fireplace and the circuit is intended to be used by either the DW or FP, one at a time. 😮 This is not the case as I have a separate circuit breaker that successfully covers the fireplace. Then I was told that the DW prep is in fact an isolated circuit and to test all 110v outlets. 🤷🏼♂️ Awaiting response from me saying that has been done.
If anyone can help it would be greatly appreciated as knowing what circuit breakers control what is a pretty important piece of information. Or if you could peek under your the island drawers and let me know if you have two Romex cables in the DW receptacle.
I have posted on here before that I added an outlet on the outside of the island from the DW prep. I revisited my installation to remove the Speedwire receptacle in favor of wire nuts in a grounded metal Handy box. That's when noticed the 2nd Romex.

