2025 Paradigm 370FB solar panel specification

[Electrified]

Does anyone have the specifications of the solar panel that comes standard on the 2025 Paradigms? Alliance doesn't seem to know what they are putting in as one marketing piece shows a 320 watt panel and a 20 amp charger while the other shows a 400 watt panel with a 30 amp charger. I have the latter of the two but can't seem to find any brand or specs for the 400 watt panel that they use. TIA

 

[BryanValRox]

Does anyone have the specifications of the solar panel that comes standard on the 2025 Paradigms? Alliance doesn't seem to know what they are putting in as one marketing pieces shows a 320amp panel and a 20 amp charge while the other shows a 400 amp panel with a 30 amp charger. I have the latter of the two but can't seem to find any brand or specs for the 400 watt panel that they use. TIA

Ok, I will ask the question with all of the respect that it deserves. I am admittedly not a solar expert,but if you know the specifications of what you have,why does the brand matter?

 

[Electrified]

Ok, I will ask the question with all of the respect that it deserves. I am admittedly not a solar expert,but if you know the specifications of what you have,why does the brand matter?

I don't have the specifications other than it is a 400 watt panel. A spec sheet looks like this: https://cdn.shopify.com/s/files/1/0058/2769/0553/files/RS-M250.pdf?v=1753152390

 

[BryanValRox]

I don't have the specifications other than it is a 400 watt panel. A spec sheet looks like this: https://cdn.shopify.com/s/files/1/0058/2769/0553/files/RS-M250.pdf?v=1753152390

So, again with all do respect. what am I missing? You indicated in your original post that you had that latter, implying you have 400w, 30 amp system.Could you clarify your ask? I know Alliance has used Renogy, Rich and Victron components over the years. If you know the specifics of your components, I am struggling to understand why the brand matters. Respectfully, am I mis understanding your ask?

 

[Electrified]

So, again with all do respect. what am I missing? You indicated in your original post that you had that latter, implying you have 400w, 30 amp system.Could you clarify your ask? I know Alliance has used Renogy, Rich and Victron components over the years. If you know the specifics of your components, I am struggling to understand why the brand matters. Respectfully, am I mis understanding your ask?

The brand does not matter. I just want a spec sheet. If I know the brand however, I can look up the spec sheet on their site.

 

[BryanValRox]

The brand does not matter. I just want a spec sheet. If I know the brand however, I can look up the spec sheet on their site.

Understood, thanks for your response. I guess I just don’t understand your ask. Isn’t 400 W 30 amp, 400watt, 30amp?You confirmed you had these values in one of your previous posts .
I will defer to someone else here to try to better understand and answers your questions.
I certainly can understand the request for the brand spec sheet, but isn’t 400w/30 amp a standard electrical rating regardless of the brand?

 

[TG74]

I was curious when we got ours as well, as the marketing info at the time showed a 30 amp solar controller, but ours had the 20 amp version. I just wanted to be sure the controller was spec'd appropriately for the panel. I found that there was a sticker on the underside of the solar panel, so I slid my phone under the panel to get this photo of it. Maybe there's a sticker on yours as well.