• Click here to access some of the presentations made during the 2022 National Rally

Help with NORCOLD Residential Fridge that has come loose in 370FB

S

suzique78

New member
Good morning everyone,
Danny and I have been trying to figure this out on our own. But we need some assistance! We have a 2023 Paradigm 370, on our last trip, we noticed that our residential fridge (19 cubic foot NORCOLD) is loose, and has moved from its stable position.
I have been searching for either a You tube video, or possibly someone has already had to fix this issue and could like to share either a diagram of where/how it is mounted to the RV and the measurements of the cabinetry that encases the outside of the fridge., as we will need to replace a piece on the left side.
Any assistance would be greatly appreciated! Thank you all in advance!
 
Oregon_Camper

Oregon_Camper

Forum Admin
Staff member
The Norcold frig (12v) is mounted from the inside, via wood screws. If you look on the inside of the frig, you will see round..disc like plugs. Take them off and you will then see the screws that are used to mount the frig to the molding.
 
S

Socal-Paul

Well-known member
If I have screws that have come out I drill out the hole to accept a 1/8" hardwood dowel then epoxy the dowel in place. Drill a pilot hole in the dowel before replacing the screw. The moulding is more difficult especially since I'm not sure of the damage. Perhaps if can just be glued back together held in place while drying with finishing nails or clamps? Really have to see the damage.
 
You must log in or register to reply here.
Top