Ramjetr1960
Member
Anyone have a 2024 29rl and has a motion sensor light in the pass through that won't shut off?
Roger
Roger

Where is your switch located?If you haven't already contacted Alliance I would try that, our pass through lights have a switch on them.
Mike i think those lights have to be defective. The pantry lights look the same and they work...so I submitted a Warrenty slip to alliance...haven't heard anything yetI was waiting for someone to mention this about the lights! We have had our 29RL since May and have tried several things to turn off the motion lights in the pass thru. Wife sewed some little flaps from scratch material with velcro on them to cover the lights and they work about 1/2 the time. Can't find a switch anywhere on them either but did find where they are fed into the front compartment right above the battery box. Was going to put a switch there but havent gotten around to it. Let me know what you find out. Thanks, 7ACmike
Hi mike, i was told by alliance to take the black wire and the white wire and swap them. It blew a fuse. I replaced tge fuse and put the wires back to their original place and now the lights work as advertised...go figure...I was waiting for someone to mention this about the lights! We have had our 29RL since May and have tried several things to turn off the motion lights in the pass thru. Wife sewed some little flaps from scratch material with velcro on them to cover the lights and they work about 1/2 the time. Can't find a switch anywhere on them either but did find where they are fed into the front compartment right above the battery box. Was going to put a switch there but havent gotten around to it. Let me know what you find out. Thanks, 7ACmike
I have the same issue. Please let us know if and when you get a response. I’m leaning towards putting a on off switch.I have a 2024 29RL with the same problem. Pass thru storage lights will not turn off. No switches, buttons, knobs...etc anywhere. Did the wire swap Ramjetr1960 did but no help. Sent email to Alliance customer service but nothing yet.
Alliance sent me new lights. Haven’t installed yet. Will add a light switch down there to turn them off and onI have the same issue. Please let us know if and when you get a response. I’m leaning towards putting a on off switch.
What was the procedure to get them replaced from Alliance ? My 5er is only 4 months oldAlliance sent me new lights. Haven’t installed yet. Will add a light switch down there to turn them off and on
I called their engineering section via customer service and did a trouble shooting proceedure they asked me to do. Sent them some pictures of the lights and wiring because they wanted to know the wire colors. Nothing worked, so they sent me two of the same style lights. I am going to install two miniature 3-way switches and use them to control the lights.What was the procedure to get them replaced from Alliance ? My 5er is only 4 months old
I like your idea of installing two switches. I assume one one each side of the cargo area. Could you send me info on the miniature 3way switches? ThanksI called their engineering section via customer service and did a trouble shooting proceedure they asked me to do. Sent them some pictures of the lights and wiring because they wanted to know the wire colors. Nothing worked, so they sent me two of the same style lights. I am going to install two miniature 3-way switches and use them to control the lights.
Same here. Would like info on the switches. These motion sensors just are not the bestI like your idea of installing two switches. I assume one one each side of the cargo area. Could you send me info on the miniature 3way switches? Thanks