• Click here to access some of the presentations made during the 2022 National Rally

Thank you Alliance

johnm

Well-known member
Well, we have purchased a 385FL and were able to get into the factory on a tour to inspect it and take measurements for future reference. A special thanks to Zaryn and April for helping put this together for my wife and I. Also a big thanks to Ben for his help in getting us started in the right direction!
We should take possession in a couple weeks or so. One question - is there a 2025 owners manual for the 385FL on here?
 

7426TRISS

Well-known member
Welcome,

You will find the manual incomplete, somethings are there, others are not. If you have questions, use this forum.

I have a 2024 385FL, have had to ask lot's question of Alliance and in this forum.

If you have questions, the Family is here to help!
 

johnm

Well-known member
Welcome,

You will find the manual incomplete, somethings are there, others are not. If you have questions, use this forum.

I have a 2024 385FL, have had to ask lot's question of Alliance and in this forum.

If you have questions, the Family is here to help!
Thanks! "Incomplete"? I did find the manual on here and read a chunk of it.... its a helluva lot more complete than my Fuzion's was! And yes, I have found the forums were a lot more helpful than Keystone was.... I suspect that our new Alliance will have fewer issues and in touring the factory I had a lot of pre-questions answered..... Currently, I have no doubts about our recent purchase and am looking forward to our first trip!
 

johnm

Well-known member
Congratulations on your new rig!
Roll On!
Thank you! But we wont get it until Wednesday!!! Had an inspector and there were a few minor issues to get fixed.... nothing major... gray gate valve and dimmer switch were the most problematic....
 
Top