EcoFlow Delta Pro use

[Bart]

Hello All!

I have a shiny new Delta 292 RL, and I thought I could use the 30 AMP connection on my EcoFlow to provide some power to the rig. But when I plug in the connection, the EcoFlow immediately shuts off. I've been trading emails back and forth with the EcoFlow help desk, and their latest question is on the specifications of the power draw of the RV.

Can anyone point me to where I may be able to find that information?

Thanks!

 

[BryanValRox]

Hi Bart,
Your question has many answers depending on what devices are powered on at a given time.
You can use ohms law to figure the electrical ratings of a device you are trying to power.
Without specific knowledge of your loads, there is no way to accuracy answer your question, unless you are looking for the maximum capacity of your unit. 120volts x 30 amps = 3600 watts.
As a test, you could shut off all of the branch circuit breakers and see if your device will stay active. If it does you could turn breakers back on one at a time to see which ones it will power.

 

[Bart]

Thank you! I thought everything was off but did not shut it off at the breaker box. I will try that!