Search results

Trent, It’s the SF-42Q 35/30 depending on the model. Cheers, Rob

Merch drop...get you Alliance RV Solo Stove Mesa for your holiday wish lists!

Happy Holidays Allies! We’ve worked with the team at Solo Stove to bring you an opportunity for an exclusive branded Mesa fire pit just in time for your holiday wish lists! Bring warmth to the table. Mesa is the tabletop fire pit made to elevate your space’s aesthetic. With Dual Fuel...

We wanted to let you all know that we are working on bringing you an Alliance RV merchandise store. The plan is to launch the store the first half of 2023. If there are branded items you'd like to see available, please comment in this thread below. We are looking forward to your comments...

Gotcha; I have a call in with Dexter to discuss. When you went to check the torque what was it?

RockingRK- The spring hanger bolts and U-bolts are not the same as the wet bolts for the shackles on the CRE3000. The wet-bolts are 40 lbs. as the guide indicates. The U-bolt nut and hanger bolts are 70-80 lbs. Where are you getting 80 lbs. for the wet bolts on the guide?

Hello Allies, There were a couple of versions of our Torque Quick Reference Guide out there, so I wanted to provide a link to the current revision from our Owner Empowerment area of the Alliance Academy on AllianceRV.com. In it you'll find quick reference torque values for your pin box...

Great job on doing a visual inspection. Check for damage to the area (rodent/chewing). When something works one time then doesn't, ask yourself "what's changed?" For the wires, here is what they are. Blue-T-Stat communications Yellow: attached to a white wire for ground Red- 12v power hot...

I asked Jim Bonacci to look at your coach model in the plant. He said that there is an additional wire connection that you could check. It’s where he believes the wire from the middle A/C comes down and connects to the wire that goes over to the furnace itself. In all the cases he saw in the...

If you have power to the furnace and the wiring is good, then like I said earlier it is likely a board or possibly the limit switch that is open or has a wire that's not secure. If you let the team know at service@alliancerv.com / 574-226-0140 they will ensure that you get taken care of...

Good that means the thermostat and signal coming to the furnace is working. This is where (if you want) you’ll need to get into the compartment behind the wall to verify connections with those power wires. Jim’s video discuss which ones. However, if all the wires have good connection AND the...

You’re not going to get any power at the on/off switch unless the blower starts to run. Let’s make sure that the thermostat wires are secure and you’re getting power there. Take the thermostat off the wall by tapping it up and pull it out until you can see the wires. Check the wires to see if...

Ok, that helps. In this case, if you feel comfortable I’d do a detailed inspection of the wiring connections that power the furnace. I’ve attached a 5 min video of our very own Jim Bonacci discussing the wiring of the furnace. When inspecting the area please be very careful as the furnace...

Has the furnace ever been on or did it just stop working?

Marc-Did you resolve your furnace issue?

Marc-Have you taken off the outside panel and checked to see if the on/off service button is "on"? This may be the issue as it certainly sounds like a power problem.